Tercoo Rotating Blaster

Removing rust.

Tercoo® is a rotating disk for the removal of rust, paint, tar, epoxy, paint, adhesives etc from various materials such as steel, iron, concrete or stone. The result is a sandblasted surface with the appropriate texture suitable for the application of a new protective coating.

Tercoo® provides the correct surface preparation for proper adhesion of new protective coatings.

How does Tercoo work

Tercoo® is a natural rubber disk with 12 hard metal (tungsten carbide) tips (pins). The tips are at a certain angle to the centre of the disk. During operation, the centrifugal force created by the rotational speed of the drill causes the flexible rubber disk to react in such a way, that a “hammer effect” is created with the tungsten carbide tips. This movement ensures that the tips clean the surface perfectly, removing all contaminants and other old coatings. The hammer effect creates no heat, so tough materials such as tar, adhesives and sealants will be easily removed. This is an entirely opposite concept compared to other tools. Other tools use friction to remove contaminants (steel brush etc) which produce a lot of heat and work ineffectively with bitumen based products, tar, adhesives, tectyl etc.

In other words, it does not matter what the coating, Tercoo® is always clean.

Use and safety

  • ALWAYS wear goggles, working gloves, dust mask and protective clothing;
  • Maximum speed 4000 rpm;
  • Optimal speed between 2500 and 3000 rpm; DIRECTION = clockwise;
  • Disk should never be used on: EDGES, RAISED SURFACES etc.


If you need us then send an e mail.